Full Face Masks Fire Heat Radiant Resistant Test Apparatus

Introduction:
Fireman fire protective clothing is mainly composed of jacket and bibcomposition,may also wear fire protective helmets, fire protective bootsandfire-protective gloves!
Each set must be fitted a serial number of check marks given by national fire equipment quality inspection center to manufacture.

Standards

• EN 136 - Respiratory protective devices - Full face masks - Requirements, testing and marking

Main Features
1, Cabinet paint treatment, beautiful; all toolings are made of stainless steel production, appearance, corrosion resistance;
2, Inlet flow control valve, precise control of the gas flow; precise control of the flame height 40mm ± 2mm;
3, This Heat Radiant Resistant Test Apparatus uses imported brands gauge and a pressure regulating valve;
4, This Heat Radiant Resistant Test Apparatus uses imported needle valve to control the burner gas flow rate;
5, PLC and touch screen control systems; test interface is easy to operate;
6, The system automatically timing, the thermal data is automatically recorded and stored;
7, Various test reports independent storage and freedom retrieval;
8. Metal headmould, heat-resistant, corrosion-resistant;
9. The distance between radiation source and the metal mould is 175mm, the HRR at this location is 7.0~9.0 kW / m2;
10.US imports of heat meter to accurately detect the radiant heat;
11.Temperature controller controls the heat release rate of the heat radiating device (resolution: 0.1kW / m2)
12. Radiation clap board is free for extraction and placement.
13. Head-mould moving is base on the slide design,
14. Breathing apparatus: artificial respiration can be carried out during the testing process; artificial breathing device work 10-30 times per minute, each circle 1.0~2.5L,
15.Optional: Ventilator

Basic information